logo

send us a quote-request or CALL US
Corporate HQ   800-305-3559
Bakersfield, CA   661-399-4540
Phoenix, AZ   602-256-2990
Sacramento, CA   916-640-1859
Salt Lake City, UT   801-973-8200
Santa Fe Springs, CA   562-868-0456
Vancouver, WA   360-737-1848
 
Eastern Region HQ   713-692-7473
Broussard, LA   337-369-6788
Denver, CO   303-288-3033
Houston, TX   713-692-7473
Hammond, IN   708-331-0300
Newtown, PA   215-550-6325
Pineville, NC   704-504-3302
 
Nisku, Alberta, CN   780-955-5510
  • Barlows Formula

Barlows Formula

Barlow's Formula is used to determine:

  • Internal Pressure at Minimum Yield
  • Ultimate Bursting Pressure
  • Maximum Allowable Operating Pressure
  • Mill Hydrostatic Test Pressure

The formula is expressed as P=2St/D, where:
P = pressure, psig
t = nominal wall thickness, in inches(i.e. .375)
D = outside Diameter in inches
S = allowable stress in psi, which depends on the pressure being determined utilizing Yield or Tensile depending on what is trying to be determined

For example:
Internal Pressure at Minimum Yield:
S = SMYS - minimum yield for grade of pipe

Ultimate Bursting Pressure:
S = SMTS - minimum tensile strength for grade of pipe

Maximum Allowable Operating Pressure:
S = SMYS - reduced by a design factor

Mill Hydrostatic Test Pressure:
S = SMYS - reduced by a design factor depending on OD and grade

P = Pressure psig
t = Nominal Wall Thickness in.
D = Outside Diameter in.
S = Allowable Stress psi.